Login | Register

Industrial & Scientific

KeeYees BME280 Temperature Humidity Atmospheric Pressure Sensor + 0.96" IIC OLED LCD Screen LED 128X64 Module + D1 Mini ESP8266 NodeMcu Lua WLAN WiFi Development Board for Arduino Raspberry Pi

BME280 Module Supports either SPI or I2C interface to communicate with the micro controller, can independently measure not only the temperature humidity, but also the pressure. ...

Description

  • 【BME280 Module】Supports either SPI or I2C interface to communicate with the micro controller, can independently measure not only the temperature humidity, but also the pressure.
  • 【LCD 128X64 display Module】The IIC address can be changed, it is convenient to use with different machines; Four square holes are easy to install.
  • 【D1 mini module】It is a mini WIFI board based on ESP-8266EX, which contains 11 digital input / output pins, all pins have interrupt / pwm / I2C / 1-wire and a micro-USB connection; 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE.


Specifications:

Name: BME280 Module Sensor
Supply Voltage: 1.8 - 5V DC
Interface: I2C (up to 3.4MHz), SPI (up to 10 MHz)
Temperature: -40 to +85°C
Humidity: 0-100%
Pressure: 300-1100 hPa
Temperature: 0.01°C
Humidity: 0.008%
Pressure: 0.18Pa
Temperature: +-1°C
Humidity: +-3%
Pressure: +-1Pa
I2C address: 0x76

Name: LED 128X64 LCD Screen Module
Size: 0.96inch
Resolution: 128X64
Viewing angle: greater than 160 degrees
Supported platforms: for arduino, 51 series, MSP430 series, STIM32 / 2, SCR chips
Low power consumption: 0.04W during normal operation
Support wide voltage: 3.3V-5V DC
Working temperature: -30-80 degrees
Volume: 27MM * 27MM * 4.1MM
Driver IC: SSD1306
Communication: IIC, only two I / O ports
No font: The software takes word modulo
Backlight: OLED self light, no backlight
Interface:
VCC: 3.3-5V
GND: Ground
SCL: Serial Clock
SDA: Serial Data

Name: D1 Mini NodeMcu Lua Development Board
Main Chip: ESP8266 CH340G
WIFI Development Board, 4M bytes
supported (except D0)
Support OTA on line
1 Micro USB connection
1 analog input (3.3V max input)
5V 1A switching power supply onboard
11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire and a micro-USB connection

Package included:
1 x BME280 Digital Sensor Module
1 x 0.96''OLed 128X64 LCD Screen Module
1 x D1 Mini NodeMcu Lua Development Board